Installation Instructions

For Wiper Blades

Wiper Blade Installation Instructions for the:

Pinch Tab GVM- Function C Adapter

This wiper arm is being installed on 40% of 2007 and 2008 vehicles being introduced by auto manufacturers. The Function C Adapter is installed on the wiper.

Installation Guide »

Step 1

Remove the nose piece by putting your finger under the nose piece and pinching the two prongs with your other fingers (or a pair of pliers). Gently lift off the nose piece.

Step 2

Place FlexBlade GVM into the wiper arm of your vehicle as shown in illustration 2.

Step 3

Place nose piece over the two prongs and press down until you hear a locking sound. Make sure the two prongs are showing through and locked into place.